python中怎么樣才可以獲取毫秒級時間？獲取毫秒級時間方法分享！

通過使用和學習一階段關于python的編程語言和使用之后今天和大家分享“python中怎么樣才可以獲取毫秒級時間？”這個問題的解決方法和相關內容解決思路！

在python里獲取ms級系統時間可以通過以下方式獲?。?/h2>

import datetime
print(datetime.datetime.now().microsecond)

但通過以下代碼測試，發現返回的并不是ms的值，而是us的值：

import datetime 
def getTime_ms():
    return (datetime.datetime.now().hour*3600 +
            datetime.datetime.now().minute*60+
            datetime.datetime.now().second )*1000+
           datetime.datetime.now().microsecond/1000
 
def timetime():
    t = getTime_ms()
    while getTime_ms() - t < 500:
        pass
    a = getTime_ms()
    print(t, a, a- t) 
  
if __name__ == '__main__': 
    from timeit import timeit
    t = timeit('timetime()', 'from __main__ import timetime', number=1)
    print(t)

打印結果

(35460614, 35461114, 500) 0.499531984329

上面實驗不太直觀，換一個直觀點的：

def timetime():
    t1 = datetime.datetime.now()
    while 1:
        t2 = datetime.datetime.now()
        if (t2 - t1).microseconds >= 1:
            print(t2,t2.microsecond,t1,t1.microsecond,(t2-t1).seconds)
            break 
 
if __name__ == '__main__':
    from timeit import timeit
    t = timeit('timetime()', 'from __main__ import timetime', number=1)
    print(t)
    #print (datetime.datetime.now())

輸出

(datetime.datetime(2019, 4, 3, 10, 6, 20, 461882), 461882, datetime.datetime(2019, 4, 3, 10, 6, 20, 461863), 461863, 0) 7.10487365723e-05

def timetime():
    t1 = datetime.datetime.now()
    while 1:
        t2 = datetime.datetime.now()
        if (t2 - t1).microseconds >= 1000:
            print(t2,t2.microsecond,t1,t1.microsecond,(t2-t1).seconds)
            break 
 
if __name__ == '__main__':
    from timeit import timeit
    t = timeit('timetime()', 'from __main__ import timetime', number=1)
    print(t)
    #print (datetime.datetime.now())

輸出

(datetime.datetime(2019, 4, 3, 10, 13, 52, 76548), 76548, datetime.datetime(2019, 4, 3, 10, 13, 52, 75547), 75547, 0) 0.00104904174805

補充：Python datetime去除毫秒 返回當前時間

datetime模塊返回當前時間

import datetime
if __name__ == '__main__':
    a = datetime.datetime.now().replace(microsecond=0)
    print(a, type(a))

運算結果：

2020-05-22 12:13:42 <class 'datetime.datetime'> Process finished with exit code 0

那么以上的內容都是經過自己的搜索整合還有個人經驗，希望能給大家一個參考，更多有關于python的編程問題我們都可以在W3Cschool進行學習和了解！